Need Help?
Call Us: 01491 412416
Email Us: enquiries@mdmtechnik.co.uk

MDM Technik Marlow

Focus RS Revo Remap

Usable Performance
Stage 1          £598.80 inc VAT

Stage 1 software is a must have for any standard RS. With power and torque increases throughout the entire rev range and very smooth power delivery, Revo Software gives the RS the performance it should have had when Ford released it.
With adjustable settings for boost, timing and fuelling, the vehicle is set up to suit the conditions, fuel quality and drivers style.
Performance increases are significant, and with Revo's linear throttle setup, drivability is improved.

  •  +40-55hp +70-90ftlb stage1 increases
  • Switch-able performance software (Boost/timing/fuelling)
  • Anti-theft mode
  • Speed limit removed

Adjustability

 

MDM Technik package deals

MDM Technik are pleased to announce Ford Focus MK2 RS package deals from stage 2 to stage 5.     All kits are 100% UK legal due to the use of Milltek 200cpi Sports Cat. If you would like a decat fitted (for race / track use), please let us know and we will reduce the price accordingly.

These package deals have been built with performance, quality and price in mind. We offer a range of different exhausts, intakes, intercoolers and inlet manifolds from the likes of Airtech, Pro alloy, Chris Tullets, AS performance, Sitech, Anembo and Mountune. If you would prefer a Chris Tullets exhaust instead of a Milltek or a Pro alloy intercooler instead of a Forge unit, please call or email us with your preferred choice and we will quote accordingly.

All parts are available separately so you can build your Focus RS over time when funds allow.
When building your dream Focus RS you can go from stage 1 to stage 2 and just pay the difference. If you already run Revo stage 1, you only pay the difference of the remap cost (£60.00) and the required hardware. So, from Revo stage 1 to Revo stage 2 package, the cost will be £2100.00.

 

Stage 2 from £2699.00 inc VAT includes Revo stage 2 software, Milltek turbo back system (non resonated – louder) and Forge high flow intake. Approx BHP 355 – 380.

Stage 2 Performance Software has been specifically developed to attain the best possible performance from the RS with a bolt on performance exhaust and quality cold air intake. Stage 2 allows you to run a sports cat or de-cat without the CEL (Check Engine Light) being triggered by a ‘CAT Efficiency’ error code. Stage 2 software is boost, fuelling and timing adjustable with slightly more flexibility than Stage 1 allowing the vehicle to be setup to suit the fuel quality, driving conditions and driver preferences. 2.5T RS Stage 2 software is specifically tuned to suit the following hardware upgrades:

Hardware Requirements:

- Turbo Back Exhaust with Sports or De-cat
- High Flow Intake System

Hardware Recommendations:

- Uprated Intercooler
- Uprated Plugs

 

Stage 4 Performance Software has been specifically developed to attain the best possible performance from the RS with the bolt on performance modifications as per Stage 2, however is specific to cars with up-rated fuel systems. Power increases depend very much on the hardware, settings and fuel being used. The up-rated fuel system allows much more power throughout the rev range but specifically in the midrange where the stock setup is insufficient. Stage 4 software is boost, fuelling and timing adjustable allowing the vehicle to be setup to suit the fuel quality, driving conditions and driver preferences. Stage4 software is designed for customers who already have the following hardware installed. If building a car we recommend following the Stage4+ specification.

Hardware Requirements:

- Turbo Back Exhaust with Sports or De-cat
- High Flow Intake System
- Uprated FMIC 
- 550cc or 650cc injectors (files are available for both specs.)

Hardware Recommendations:

- Uprated Inlet Manifold
- Uprated Plugs
- Uprated Clutch

 

Stage 4+ performance software has been specifically developed to attain the best possible performance from extensive modifications. Given the Revo linear throttle setup and the huge but useable power gains, an RS at this spec is a very capable car.

Hardware Requirements:

- Turbo Back Exhaust with Sports or De-cat
- High Flow Intake System
- Uprated FMIC 
- 775cc injectors
- Revo Fuel Pump
- Uprated Inlet Manifold

Hardware Recommendations:

- Uprated Plugs
- Uprated Clutch

 

Stage 5 – Please call for prices

Stage 5 performance software has been specifically developed to attain the best possible performance from extensive modifications including a Big Turbo upgrade. This is the ultimate setup for the RS.

Hardware Requirements:

- GT3076 Turbo Kit with 38mm external wastgate
- Turbo Back Exhaust with Sports or De-cat
- High Flow Intake System
- Uprated FMIC 
- 775cc injectors
- Revo Fuel Pump
- Uprated Inlet Manifold
- Denso IKH24 Spark Plugs

Hardware Recommendations:

- Boost Gauge
- Uprated Clutch
- Oil Pressure/Temp. Gauge